Coleman 4D CPX6 High-Tech LED Lantern
Coleman 4D CPX6 High-Tech LED Lantern Reviews
The Coleman XPS High-Tech LED is a full-size lantern that puts out only a fair amount of light at 190 lumens. This is enough to see what you are doing near the lantern, but it is not really adequate for reading or other tasks that require decent light. For comparison, a 60-Watt incandescent light bulb produces about 800 lumens, and dual-mantle propane or liquid fuel lanterns are in the range of 800-1300 lumens. So this LED lantern is not going to light up a campsite very well. However, for a light inside a tent or as an emergency light at home it would be adequate (and much safer than a propane or liquid fuel lantern.) Like many LED lights, the light produced by the lantern is a somewhat unnatural blue-white hue. It does have a diffuser tube around the LEDs; some other LED lanterns don't have this and so their light is quite harsh. The outer clear housing is made of plastic so it won't shatter, however, it can be easily scratched. Strangely, one of the Coleman High-Tech lanterns that I bought was somewhat brighter and a slightly different hue than the other one - perhaps this is a quality control issue. Unlike some of the other Coleman LED lanterns, this lantern allows you to adjust the light continuously with a dial rather than just having a high and low setting. (It actually has about six light settings as you move the dial.) On the highest dial setting, the box says that regular alkaline batteries will last for up to 25 hours, and up to 300 hours on low. The instructions say intermittent operation gives longer life than continuous operation. Also, this model has round mirror reflectors on the bottom and top of the LED tube; some of the other Coleman LED lanterns don't have this. Because of these features, I think the High-Tech is better than the other Coleman 190 lumen LED lanterns that use the "Classic" design style (that is, they look like propane lanterns.) Besides the standard use of four D-cell batteries, this lantern can take the optional Coleman XPS rechargeable battery module (about $20). It snaps in the bottom of the lantern in place of the regular battery case. The module can be recharged from a regular 110 Volt electrical outlet or a 12 Volt car cigarette lighter (which is handy for car camping). However, it doesn't last as long as four regular alkaline batteries. It only lasts about seven hours on high and 14 hours on low. The battery polarity marks, "+" and "-", inside the battery case are hard to see, and impossible in low light. (You can't tell the polarity from the springs or contacts either since they are all the same orientation.) It is easy to put in the batteries backwards, which might damage the light. You could put a stick-on label on the battery case cover to show the correct battery orientation. The battery case easily pops out by pressing on two tabs, and then the case has a flip-top lid. You then just press the case back in and it locks in place with the tabs. This is better than some other designs for putting in the batteries. However, you have to insert the case in the proper orienation; it is possible to get it stuck if you insert it incorrectly. In summary, this is a decent LED lantern, but the light it produces is only fair and definitely not bright. It really is only good for temporary emergency lighting at home if the power goes out or for inside a tent. There are other brighter LED lanterns available, although most all have other disadvantages. LED lanterns will probably get better in the next few years as the technology improves.. this is my Coleman 4D CPX6 High-Tech LED Lantern reviews
Coleman 4D CPX6 High-Tech LED Lantern Specs
- Save $20.00 when you spend $100.00 or more on Select Coleman Products offered by Amazon.com. Here's how (restrictions apply)
Coleman 4D CPX6 High-Tech LED Lantern Best buy
Coleman 4D CPX6 High-Tech LED Lantern. Coleman 4D CPX6 High-Tech LED Lantern will.. (Read More)
Coleman 4D CPX6 High-Tech LED Lantern,
No comments:
Post a Comment